Digital out via sync port Dewe-43

Anders Ingemansson

Posted on 19.01.2021 12:18


I have checked the description of how to set the sync output to DO. But do not find if I lower the signal to GND or if I get a voltage out from the pin. If so, what voltage do I get out and how much can the output drive.

Primoz Lapi
Customer Support Engineer
Posted on 20.01.2021 15:04


the output on the sync connector DO is max 5V and 100mA.

Login to reply to this topic. If you don't have account yet, you can signup for free account .